- Sensor(CMOS): Using high-performance CMOS image sensor, with millions of pixels resolution.
- Auto Gain Control (AGC): Built-in auto gain control (AGC) circuit. The color camera can get high definition picture in low Lux condition.
- Auto Electronic Shutter (AES): Built-in auto electronic shutter function. The color camera AES speed can reach 1 / 100,000s.
- Gamma Characteristic: Camera Gamma characteristic is 0.45.
- Scanning Model: NTSC or PAL mode.
- Night Time Version: 0 Lux with IR LED ON. Adopt Taiwan high-quality IR LED, having very good night version effect.
Cover Material: Metallic
Diameter of Built-in Lens: 3.6mm
Power: DC 12V / 300mA
Power System: PAL / NTSC
Model: SAH130(P) / SAH130(N)
Active Pixel: 1280*960
VIDEO.OUT: AHD/CVBS // PAL/NTSC
Minimum Illumination: 0.01Lux(F1.2)
Gama adjust: 0.45
Lens Mode: DC/Manual
Electric Shutter: 1/50s-1/50000s // 1/50s-1/50000s
S/N Ratio: 50dB(min)(AGC closed)
WHITE Balance: ATW/AWC SET/Indoor/Outdoor/MANUAL
AGC: Level 0-15
D WDR: OFF/ON(Level 0-8)/Auto
Sens UP: X2-X30
Mirror: OFF/Mirror/V Flip/Rotate
Language: 11 kinds(Traditional Simplified English Spanish Portuguese Russian German French TUR NEL ITA)
Motion Detection: 4 areas optional
Privacy Zone: 4 areas optional
Operation Temperature: Temperature -10 ~ +60 centigrade; Humidity less than 85%RH
Package Dimension: 110 x 110 x 90mm / 4.33 x 4.33 x 3.54inch
Product Weight: 371g / 13.09oz / 0.82lb
Gross Weight: 443g / 15.63oz / 0.98lb
Trouble and Solution:
- No Picture After Providing Power: May be the power supply voltage is abnormal, please check the power supply voltage and pole whether exactitude. Please check all the connecting cable and monitors whether be connected correctly or not.
- The Picture Level Direction Have Flowing Interference Ripples: May be caused by the power supply AC ripples, it need filter the wave of the power supply. Check the monitor and peripheral equipment used.
- The Picture Background Color Changes Continuously: The fluorescent of the lamp electromagnetic field cause color roll. This is proper phenomenon of the cameras. Reduce the fluorescent lamp numbers or increase the distance between the camera and the fluorescent lamps can improve it. Use Power supply external sync. Camera can solve it.
- The Picture Smear Too Mass
The power of the supply voltage unstable. Connecting cables not connect correctly or have high impedance.
Package Weight : 443 G / 15.63 Ounces
Package Dimensions (L*W*H) : 110*90*110 MM / 4.33*3.54*4.33 Inches