- The gauge will both show the digital and analog LED
- Widely used in the Car garage vehicle maintenance shops
- Smoke tint lens during the day,Clear and bright LED Display during the night
- Add a racing look and feel to your ride,High grade and light weight
Unit Type: PSI
Input Voltage: 8-18V
Display Range: 0~120 PSI
Digital Accurately: Every 1 PSI
Wire Length: 59cm
20 Pcs LED: 2Pcs Yellow/16Pcs Green/2Pcs Red
- Red: 12V accessory Power
- Black: Ground negative
- White: Engine accessory power
- Orange: Head light switch (12V switch power)
- Green: Boost sensor (connect to green wire from sensor)
1. Scanning: When at start or shut, the analog type LED will scan back and forth automatically.
2. General Display: The digital display will show the value of press, and value is corresponding with analog LED.
3. Electrics voltage display & warning function:
- When at the start, Red LED ( for VOLT only ) will light up and digital display will show the value of voltage 30 seconds. After then, the digital display will show the value of press. Every 10 minutes show the Voltage at 30 Seconds.
- When the voltage is lower than 11.0V, Red LED ( for VOLT only ) will shine and the digital display will show the value and keeping shine to warning.
- When the value of press is lower than 0.8 or higher than 10BAR ( lower than 12 or higher than 120 PSI ) over 3 seconds, the digital display will keeping shine to warning.
Fit For 60mm Diameter Gauge Pods holder
Package Weight : 285 G / 10.05 Ounces
Package Dimensions (L*W*H) : 124*74*165 MM / 4.88*2.91*6.50 Inches