- The product is made of glass fiber and vulcanizate at high temperature，High viscosity, strong adhesive force
- Good sealing, Prevent from falling offand waterproof
- Super viscous force，It does not hurt the tyres.
- This tire repair kit Car will allow you to fix the puncture quickly and effectively and is on its way again within minutes.
-This product is suitable for Most vacuum tires.
Method of use:
1. Circle the puncture part of the tire and remove the sundries.
2. Probe the puncture direction with the puncture probe, insert and twitch along the puncture directionTo remove dirt and debris in the hole.
3. Cut one end of the rubber strip into a diagonal opening and insert it into the hole of the front end of the inserting tool, so that the length of the rubber strip at both ends of the hole is basically the same.
4. Insert the insertion needle with rubber strip into the tire along the puncture hole to ensure that the rubber strip is inserted 2/3 of the length (it must be determined that the cold filling rubber strip penetrates the tire body to avoid slipping out after inflation), and rotate the fork needle 360 degrees before pulling out the fork needle.
5. Cut off the rest of the rubber strip that is left outside the tire with a length of 5mm on the tread.
- It is not for repairing any sidewall puncture.
- This product is just rubber cement.
- Emergency repair only,repair your tire in nearst workshop.
- Do not driver too fast after repair.
Package Weight : 96 G / 3.39 Ounces
Package Dimensions (L*W*H) : 100*70*30 MM / 3.94*2.76*1.18 Inches