5 Inch 10000RPM Self vacuuming Pneumatic Sander Machine with 1m Air Tube and 6-hole Matte Surface Sanding Pad for Polishing and Sanding

Parameter Information:

• No Load Speed: 10000 rpm
• Air Inlet Size: 1/4 Inch
• Working Air Pressure: 90 - 120 Psi
• Air Consumption: 8 cfm

Specifications:

• Product Name : Pneumatic Sander Machine

• Features :
  - The best hand stress on the tool is from 5kg to 7kg when operation.
  - Artificial design, small and excellent polishing and polishing tools, the operation is not easy to fatigue.
  - small volume,high speed, low noise.
  - High balance, the use of time does not produce fatigue ,high stability.
  - Light weight, high degree of bottom, easy to handle, can be operated with one hand.
  - Different types of sandpaper can be installed by replacing different polishing discs.
  - Small size and easy to carry, the metal material is durable.
  - Vacuuming pneumatic sander for 5-inch and 6-inch pallets Cost-effective, reliable mass.

• Model: AT-980V-5
• Material: Aluminium Alloy + Plastic
• Sanding Pad Diameter: 125mm
• Applicable Sandpaper: 5 inch
• Uses: Car polishing glaze waxing

• Note :
  - Release the air supply when replacing the sand paper or the backing pad.
  - Wear protection glassess,eye protector,dust mask and gloves at operation.
  - Have a short break in every 30 minutes to avoid any possible injure due to tiredness.
  - Do not touch the rotating part of the tool with your hand or your body at operation.
  - Do not have free rotating at high speed to avoid possible injure to human body and possible tool damage.
  - Start your sanding job after you fit the sanding pad flat on the surface you are working on.
  - Stop your job when finding any irreguar sound or vibration at operation and then check and repair the tool.
  - Because that you are using clean compressed air at operation.Use an air filter at the air installation to clean the dust out of the compressed air.
  - Drop some oil to the motor and then run the tool and then run the tool slowly for a minute and finally start your work auto lubricator/oiler is recommended.
  - Any dirt dust inside the motor may result in slow rotation even block running,at this time,try to drop some oil from inlet,see whether slove the problem.
  - Do release the water out of the air compressor and air hose after operation.
  - Maintain tools with care.Keep tools clean for better and safe performance,follow instructions for lubricating.Inspect tools cords and air hoses periodically,if damaged,have them repaired by an authorized technician.

• Product Weight : 1300 G / 45.86 Ounces

• Product Dimensions (L*W*H) : 265*134*115 MM / 10.43*5.28*4.53 Inches

• Package Weight : 1300 G / 45.86 Ounces

• Package Dimensions (L*W*H) : 265*134*115 MM / 10.43*5.28*4.53 Inches

• Retail Packaging: Yes, General Box

The Close Looker:

• Please be patient! Because of detailed picture presentations, it will take more time to open the website. If the images do not show up, please right click and choose "Show Picture" to show the pictures more rapidly.

Package Include:

• 1 x 5 Inch Air Sander Machine
• 1 x Small Hex Wrench
• 1 x Bayonet Quick Connector
• 1 x 1m Air Tube
• 1 x Cloth Bag
• 1 x Instruction Manual

• Log in for wholesale prices from China, or back to China Wholesale Air Sanders List.

• Goto TOP