Features :
- the best hand stress on the tool is from 5kg to 7kg when opperation.
- Movement grinding speed, effectively shortening the operating time.
- small volume,high speed, low noise.
- Plastic Lightweight, high balance, the use of time does not produce fatigue ,high stability.
- Cylinder after heat treatment, durable.
- Trigger pressure speed control gear free speed.
- Air consumption is small, suitable for long working hours.
- Use (applicable industry) Automotive, trains, ships, electric cars, furniture and so on.
Model: Non-vacuum Pneumatic Polishing Machine
Applicable Sandpaper: 5 / 6inch
Air Tube Inner Diameter: 6.25 (mm)
Noise Value: 65DB
Exhaust Direction: Rear exhaust
Note :
- Please the air supply when replacing the sand paper or the backing pad.
- Wear protection glassess,eye protector,dust mask and gloves at operation.
- Have a short break in every 30 minutes to avoid any possible injure due to tiredness.
- Do not touch the rotating part of the tool with your hand or your body at operation.
- Do not have free rotating at high speed to avoid possible injure to human body and possible tool damage.
- Start your sanding job after you fit the sanding pad flat on the surface you are working on.
- Stop your job when finding any irreguar sound or vibration at operation and then check and repair the tool.
- Because that you are using clean compressed air at operation.Use an air filter at the air installation to clean the dust out of the compressed air.
- Drop some oil to the motor and then run the tool and then run the tool slowly for a minute and finally start your work auto lubricator/oiler is recommended.
- Any dirt dust inside the motor may result in slow rotation even block running,at this time,try to drop some oil from inlet,see whether slove the problem,or return to seller for maintenance.
- Do release the water out of the air compressor and air hose after operation.
- Maintain tools with care.Keep tools clean for better and safe performance,follow instructions for lubricating.Inspect tools cords and air hoses periodically,if damaged,have them repaired by an authorized technician.
Product Weight : 1125 G / 39.68 Ounces
Product Dimensions (L*W*H) : 180*130*100 MM / 7.09*5.12*3.94 Inches
Package Weight : 1125 G / 39.68 Ounces
Package Dimensions (L*W*H) : 187*130*100 MM / 7.36*5.12*3.94 Inches
- Please the air supply when replacing the sand paper or the backing pad.
- Wear protection glassess,eye protector,dust mask and gloves at operation.
- Have a short break in every 30 minutes to avoid any possible injure due to tiredness.
- Do not touch the rotating part of the tool with your hand or your body at operation.
- Do not have free rotating at high speed to avoid possible injure to human body and possible tool damage.
- Start your sanding job after you fit the sanding pad flat on the surface you are working on.
- Stop your job when finding any irreguar sound or vibration at operation and then check and repair the tool.
- Because that you are using clean compressed air at operation.Use an air filter at the air installation to clean the dust out of the compressed air.
- Drop some oil to the motor and then run the tool and then run the tool slowly for a minute and finally start your work auto lubricator/oiler is recommended.
- Any dirt dust inside the motor may result in slow rotation even block running,at this time,try to drop some oil from inlet,see whether slove the problem,or return to seller for maintenance.
- Do release the water out of the air compressor and air hose after operation.
- Maintain tools with care.Keep tools clean for better and safe performance,follow instructions for lubricating.Inspect tools cords and air hoses periodically,if damaged,have them repaired by an authorized technician.
Write Reviews for 5 Inch Non-vacuum Matte Surface Pneumatic Polishing Machine Random Orbital with Sander Pad for Cars Polishing / Grinding / Waxing
What do you think about this item? Please Log In to write a comment on this product and share your opinion with other people.
