Features : - It is made of stainless steel barrel, gun head and copper valve, which is not easy to damage.
- The surface of the product is electroplated and polished, which is beautiful in appearance and difficult to rust.
- The single switch is easy to use, compact and easy to carry.
- The interface metal material is firmly connected and the pressure is strong.
- It can reach a high temperature of 300 degrees Celsius, no pollution, and stable performance.
- Use for a long time, not easy to rust.
- With plastic handle, the use of more secure.
Type: Liquefied Gas Torch Welding Gun
Full Length: 665mm
Gun Length: 400mm
Nozzle Length: 100mm
Handle Length: 11mm
Note : - Found that the burner burns, damaged, aging should be replaced immediately.
- When used to leave the liquefied gas cylinders 2 meters away.
- Always check the parts and keep them sealed.
- Checking:connect the gun parts, connect the liquefied gas cylinder interface, close the gun switch, release the liquefied gas cylinder valve, check whether the leak.
- Ignition: loosen the gun switch slightly and direct it at the nozzle to adjust the gun switch to the desired temperature.
- After ignition, please do not turn on all the switches. The switch has a reserved silk path. If the gas pressure is too high, all the switches will be turned on, and the gas flow will exceed the oxygen supply limit, so it is easy to turn off the engine.
- Off: first close the liquefied gas cylinder valve, wait until the flame and then turn off the switch, leaving no residual liquid in the tube.
- After use, turn off the gas switch first, then increase the fire power, burn the gas in the gas pipe clean, and then turn off the torch switch, so as to prevent potential safety hazards caused by trapped gas.
Product Weight : 871 G / 30.72 Ounces
Product Dimensions (L*W*H) : 590*100*50 MM / 23.23*3.94*1.97 Inches
Package Weight : 816 G / 28.78 Ounces
Package Dimensions (L*W*H) : 600*110*55 MM / 23.62*4.33*2.17 Inches
- Found that the burner burns, damaged, aging should be replaced immediately.
- When used to leave the liquefied gas cylinders 2 meters away.
- Always check the parts and keep them sealed.
- Checking:connect the gun parts, connect the liquefied gas cylinder interface, close the gun switch, release the liquefied gas cylinder valve, check whether the leak.
- Ignition: loosen the gun switch slightly and direct it at the nozzle to adjust the gun switch to the desired temperature.
- After ignition, please do not turn on all the switches. The switch has a reserved silk path. If the gas pressure is too high, all the switches will be turned on, and the gas flow will exceed the oxygen supply limit, so it is easy to turn off the engine.
- Off: first close the liquefied gas cylinder valve, wait until the flame and then turn off the switch, leaving no residual liquid in the tube.
- After use, turn off the gas switch first, then increase the fire power, burn the gas in the gas pipe clean, and then turn off the torch switch, so as to prevent potential safety hazards caused by trapped gas.
Write Reviews for 50mm Single Switch Type Liquefied Gas Torch Welding Gun Support Oxygen Acetylene Propane for Barbecue / Hair Removal
What do you think about this item? Please Log In to write a comment on this product and share your opinion with other people.
