Features : - The grinder engraving kit is necessary for DIY carving and grinding.
- This electric carving tool has very mini grinder body, convenient to use.
- The grinder is suitable for agate nuclear carving wood carving.
- A fine aluminum plate, printed circuit board, printed board board.
- Use for grinder, cutting, engraving, milling, grinding, polishing, removing and drilling.
Input Voltage: 110-220V
Plug Standard: EU / US
No-load Speed: 12000 (rpm)
For Safe Use:
- Wear safety goggles to protect your eyes.
- When you finish using the unit, switch off the motor and ensure that all moving parts have come to a complete standstill.
- Before using additional accessories not included in this set, always compare the maximum allowed RPM of that specific accessory with the RPM of this tool.
- In case o electrical or mechanical malfunction, immediately switch off the tool.
- Do not activate switch when changing accessories.
- Never use grinding wheels over 1''(25.4mm) in diameter.
- Never use drill bits over 1/8''(3.2mm) in diameter.
- Never use the shaft lock when toll is running.
- Ensure that the collet size corresponds with the shaft size of the accessory.
- Store tool in locations where temperature will not exceed 50 degrees Celsius.
How to Change Accessories:
- Switch drill of and make sure not to accidentally switch on while changing accessories.
- Press down on the Chuck Lock Button. Then you can loosen and pull off the Chuck Nut by turning it anti-clockwise. Under the chuck nut is one of the Collets.
- Choose the correct size Collet for the accessory you want to use and insert into place. Replace the Chuck Nut but do not tighten completely.
- Insert the accessory into the Chuck Nut.
- While pressing down on the Chuck Lock Button, tighten the Chuck Nut by turning clockwise.
Product Weight : 197 G / 6.95 Ounces
Product Dimensions (L*W*H) : 300*250*60 MM / 11.81*9.84*2.36 Inches
Package Weight : 610 G / 21.52 Ounces
Package Dimensions (L*W*H) : 300*250*60 MM / 11.81*9.84*2.36 Inches
