- Plastic pressed into a thick pot body, light, strong and durable, not easy to crack, deformation.
- The body does not stick to sand, cleaning is more convenient.
- Using 4.6.8 different caliber copper nozzles to suit all kinds of spray needs.
- The gun is not made of steel tube, hard and hard to break.
- The rear end of the pot is pressed together with the copper ware and pot body, it is not easy to fall off and break.
- 1. Install the paint can, container assembly, and air hose securely on the gun.
- 2. The use of air pressure due to the viscosity of the paint. The nature of different, please generally spray to 0.25 ~ 0.4MPa.
- 3. Paint viscosity is also due to the nature of the paint. Operating conditions vary, However, the viscosity of 17 ~ 23S is generally appropriate.
- 4. Spraying distance 15-20CM, spraying distance too close, too far, or round Arc spray gun to spray paint, the film thickness is not beautiful.
- 1. Air cap, spray nozzle spray holes and needle valve, please do not damage.
- 2. The various parts of the clean dipped in brushes, please do not soak the entire spray gun in thinner.
- 3. When cleaning the paint channel, spray a small amount of diluent.
- 4. When disassembling, please carefully clean the parts, do not make the garbage attached to the above.
- 5. Nozzle removable cleaning.
Product Weight : 338 G / 11.92 Ounces
Product Dimensions (L*W*H) : 255*170*138 MM / 10.04*6.69*5.43 Inches
Package Weight : 440 G / 15.52 Ounces
Package Dimensions (L*W*H) : 290*160*140 MM / 11.42*6.30*5.51 Inches