- It is equipped with three air filled nozzles of different sizes. Can be applied to most inflatable orifices.
- The upper hole is aspirated and the side hole is inflated. Dual use operation is more convenient.
- Car power interface, with fuse design , safer to use.
- Imported motor is two times the life of ordinary motor, super large power motor and super large air volume.
- Environmentally friendly ABS material, healthy, environmentally friendly and durable.
- The product can be plugged into the use of automobile cigarette lighter.
- To reduce the risk, contact qualified electrician to repair or replace the damaged cord immediately.
- Carefully following the instruction on inflatable item when inflating. Never exceed recommended pressure, otherwise, serious injury might be caused by the bursting item.
- Never level pump unattended while the pump is in use.
- Do not keep / use the pump in wet condition.
- Never allow sand, small rock, etc, to be sucked into inflation / deflation port when using the pump.
- Never look inside or point the inflation / deflation port toward your eyes when the pump is working.
- Never attempt to put hand or fingers into the inflation / deflation port at any time.
- Please read the instruction carefully before use.
- This pump is intended to inflate / deflate items, such as inflatable boat, air mattress, etc. It is not designed for continuous use.
- Extended operation over 20 minutes can overheat and damage the pump.
- Do not obstruct the inflation / deflation port and keep them ventilated all the time.
- For fast inflation and shorten the motor working time, always use the suitable adapter according to the size of valve of inflatable item.
Product Weight : 279 G / 9.84 Ounces
Product Dimensions (L*W*H) : 120*85*95 MM / 4.72*3.35*3.74 Inches
Package Weight : 287 G / 10.12 Ounces
Package Dimensions (L*W*H) : 125*90*100 MM / 4.92*3.54*3.94 Inches