P10 2.6 Inch Hud OBD2 Computer Car Speed Projector Digital Speedometer Display Fuel Consumption Temperature Gauge Diagnostic Tool

Parameter Information:

• Work Voltage: 9V - 16Vdc(12Vdc / 400mA)
• Environment Temperature: -40 ~ +80 ℃
• Barometric Press: 86 - 106KPa
• Relative Humidity: 10% - 95%
• Alarm of Sound Level: >= 30dB(A)
• Sleeping Current: <=30mA
• Working Current: 40mA
• Compass Precision: +/- 1°
• Speed Rang: 0 - 400KM
• Output Frequency: Does not apply
• Rated Power: Does not apply
• Size Name: 2.6 Inch
• Wire or Wireless: Wire

Specifications:

• Features :
  - Plug and Play.
  - Real 2.6.
  - The first scan will show the vehicle protocol.
  - Multi function display mode or simple function display mode can be switched freely to show above content.
  - The language can be changed.
  - With the TFT LCD screen, you can see the display information from the HUD, no reflection, and display more clearly during the day.

• Key Functions:
  - Setting Button: It can push left / right, short / long press in.
  - Accelerating competitive mode ,Brake performance test, Reads the entire vehicle data stream.
  - Light Sensor.
  - USB Interface.
• Model: P10 - OBD speedometer with car diagnostic tool
• Rich Contents: Driving speed,Speed, Engine speed, Water tank water temperature, Voltage, The instantaneous fuel consumption, Hundreds of kilometers of instantaneous fuel consumption, Average fuel consumption, Range measurement, The total mileage traveled the cumulative, Travel time calculation, Engine fault alarm display, Remove the fault codes, Km miles free switch.
• Supported Protocol: ISO15765 CAN Bus, ISO14230 KWP2000, ISO 9141-2
• Troubleshooting:
  - The Screen Without Any Display, And No Power: Start the car engine;check if the cable line is tight;or connect the USB to the computer to check .
  - Inaccurate Time: When the device search the satellite successfully (the default 8:00 will change to China local time), set it to your local time and save and exit.
  - Inaccurate Speed : When the head up display is power on,long press in the button to enter into the menu option,and right push once switch to setting,then short press in the button to the menu,and right push the button switch to the speed adjust option. (if the dashboard shows 100,and the device shows the 101,change the default value at 106%)
  - Over speed alarm, water temperature alarm, voltage alarm, shift alarm.
  - The Device Cannot Auto Power Off: After vehicle turns off,the device still display the speed,switch the setting to Speed Offset,and adjust the value same as the device speed. (if the device shows 5KM/H after the vehicle turns off,then change the speed offset at 5KM/H)
  - Wrong Operation Lead to Crashes: Do a factory set.
• Environment Temperature: -40c- + 80c
• Atmospheric Pressure: 86-106KPa
• Environmental Noise: <= 60dB (A)

• Product Weight : 176 G / 6.21 Ounces

• Product Dimensions (L*W*H) : 141*83*43 MM / 5.55*3.27*1.69 Inches

• Package Weight : 176 G / 6.21 Ounces

• Package Dimensions (L*W*H) : 146*88*48 MM / 5.75*3.46*1.89 Inches

• Retail Packaging: Yes, Colored Box

Package Include:

• 1 x Host
• 1 x OBD line
• 1 x Anti-skid Pad
• 1 x Instructions

• Log in for wholesale prices from China, or back to China Wholesale Car Head Up Display List.

• Goto TOP