YB27VA DC 0-100V/10A Red LED Dual Display Ammeter Voltmeter Volt Amp Meter for Cars / Motorcycles

Specifications:

• Features :
  Suitable for automotive / electric cars / motorcycles battery monitoring or other car kits voltage current measurement.
  Measure accuracy is 1%. (+_1 digit)
  The color is black.

• Model: YB27VA
• Operating voltage: DC 4.5 ~ 30V
• Measure voltage: DC 0 ~ 100V
• Minimum resolution(V): 0.1V
• Measure current : DC 10A (direct measurement,built-in shunt)
• Minimum resolution(A): 0.01A
• Operating Current: <20mA
• Display: 0.28" LED digital
• Display color: Red (dual display)
• Refresh rate: About 500mS / times
• Operating temperature: -10 to 65℃
• Operating Humidity: 10 to 80% (non-condensing)
• Working pressure: 80 to 106 kPa
• Wiring:
  - Black line (thin): Vacant or buck circuit (module) negative
  - Red line (thin): Power supply+
  - Black line (thick): COM, common measuring
  - Red line (thick): PW+, measuring terminal voltage input positive
  - Yellow line (thick): IN+, current input+
• Mounting cutout: 45.5 x 26.5mm

• Note :
  The voltage between the thin red and thin black lines must be within DC 4.5-30V.
  The ammeter can only be connected to the negative of the device under test.
  10A below ammeter (include 10A), built-in shunt, does not require external shunt.
  When the black thin line vacant, it is better to use insulating tape around the exposed part of the wire, to prevent short circuits.
  If just be used as a voltmeter, it is recommended that the yellow line and the black line were connected together, to prevent the ammeter digital flashing.

• Package Weight : 25 G / 0.88 Ounces

• Package Dimensions (L*W*H) : 60*60*30 MM / 2.36*2.36*1.18 Inches

Package Include:

• 1 x Voltmeter

• Goto TOP