150W Boost Module DC-DC Car Notebook Mobile Power Supply 10-32V to 12-35V Adjustable

150W Boost Module DC-DC Car Notebook Mobile Power Supply

Statement: The output power of this module is affected by various factors such as pre-stage power supply and post-stage load in addition to the load capacity of the module itself. The following data are the results measured by professional equipment, and other factors are not considered. Power module is a kind of electronic components, please no electronic professional knowledge to buy carefully.
Module Parameters

Module nature: non-isolated boost module

Module size: length 65MM * height 23MM * (width 56.5MM including heat sink)

Input mode: IN + input positive level, IN-input negative
output mode: OUT + output positive stage, OUT-output negative

Wiring mode: welding-free, terminal

Input voltage: 10-32V

Output voltage:(1) continuously adjustable (12-35V) our default delivery voltage 19V

(2) Fixed output (any choice between 12-35V), please tell the shopkeeper when buying.

Output current: 6A(MAX)

Input current: 10A(MAX) (more than 10A, please strengthen the heat dissipation,)

Output power: natural cooling 100W(MAX), plus fan 150W(MAX)

Easy Drive 65W 90W Laptop Including Dual Core

With 12V battery with ordinary 19V 3.42A laptop module temperature is about 45 degrees

Conversion efficiency: 94% (measured when input 16V output 19V 2.) (for reference only)

Working temperature: industrial grade (-40 ℃ to +85 ℃)(the ambient temperature exceeds 40 ℃, please reduce the power to use, or add a fan)

Full load temperature rise: 45 ℃

No-load current: typical 25mA

Short circuit protection: none (please install overcurrent protector in the input)

Input Polarity Protection: None; two diodes are connected in series at the input.

Scope of application

1)DIY an output adjustable car power supply, only need to input into your 12V power supply, the output voltage you can (14-35V) free continuous adjustment, but the output voltage can not be lower than the input voltage.

2) Car notebook power supply. The input is connected to your 12V power supply, and the output is adjusted to the voltage of your notebook to work.

3) Boost charger, you can use 12V power to charge batteries higher than 12V, such as 24V batteries.

4) Power supply for your electronic equipment, as long as the voltage is adjusted to the voltage you need and the current does not exceed the rated current, it can work normally.

5) The front-stage power supply of the system. When you input 10-18V when doing a certain project, and your system board needs about 24V power supply and its power is very large, the power of the common DC-DC module is too small, and you can work directly on the computer without debugging, thus easily boosting the power.