160a double-head sheet metal cutter cutting machine cutting saw iron sheet cutting electric punching shear sound modification

1 The cutter head is frequently refueled, especially for cutting aluminum plates.
2 Open the electric drill first, then cut, exit first and then close the electric drill at the end.
3 When cutting, the incision of the cutter bar must be kept perpendicular to the workpiece to prevent hard bite from breaking the cutter head.

sheet hole opener instructions for use:
1 When a thin plate hole opener is used, first insert the front end of the electric drill and the cutter into the round hole of the hole opener to connect the cutter with the electric drill and lock it firmly, then tighten the three branches and stud screws on the shelf to prevent the hole opener shelf from sliding; Insert the ruler rod upward into the small square hole of the shelf with the left to right positioning needle, and finally adjust and tighten the top screw according to the size of the arc cut, fix the ruler firmly to ensure the accuracy of cutting round holes.
2 When cutting standard arcs, a thin plate hole opener should be used to keep the arc section smooth and beautiful. a 3mm positioning eye should be drilled first, then a 12mm hole should be drilled, and the cutter head should be inserted into the hole to cut the inner and outer circles.
Technical parameters:
1. There are two adjustable heads for cutting
2. The cutter head can be positioned 360 degrees in any direction
3. Optional 8mm electric or pneumatic drill, rotating speed 1500-3000 r/min
4. Minimum cutting radius 12mm
5. Allowable cutting thickness
ordinary iron plate: 1.8mm
stainless steel plate: 1.2mm
copper, aluminum plate: 2mm
plastic plywood car: 2mm
blow molding packaging