JUC-31F thermostat temperature control switch 0 degree ~ 150 degree temperature relay temperature sensor

model: KSD-01F[1]  
Technical parameters: System tactile temperature controller. Sensitive and reliable. Suitable for temperature control or thermal overload protection on circuit boards, etc.
1. Usage conditions
① Relative humidity: 95% at+20 ℃ environment
② Atmospheric pressure: 86-106Kpa
③ Work location: Any
2. Technical parameters
① Point form: 1D or 1H
② Contact load: 220VAC 1.5A or 24VDC 1.5A
③ Insulation resistance: ≥ 50M Ω at room temperature and humidity
④ Contact resistance: ≤ 100 mΩ   
⑤ Electrical strength: ≥ 500VAC   
⑥ Weight<2g
Features: It has stable performance, high accuracy, small size, light weight, high reliability, long lifespan, and minimal interference with wireless communication.
matters needing attention:
1. When using contact temperature sensing installation, the metal cover should be tightly attached to the installation surface of the controlled instrument. To ensure the temperature sensing effect, thermal conductive silicone grease or other similar thermal conductive media should be coated on the temperature sensing surface.
2. During installation, do not collapse, loosen or deform the top of the cover to avoid affecting its performance.
3. Do not allow liquid to seep into the interior of the temperature controller, do not cause cracks in the casing, and do not arbitrarily change the shape of the external terminals.
4. When the product is used in circuits with a current not exceeding 5A, a copper core with a cross-sectional area of 0 5-1mm ² wire connection; For use in circuits with a current not exceeding 10A, copper core wires with a cross-sectional area of 0.75-1.5mm2 should be selected for connection.
5. The product should be stored in a ventilated, clean, dry, and non corrosive gas warehouse with a relative humidity of less than 90% and an ambient temperature below 40 ℃.