Car AUX Blue tooth Audio Wireless Blue tooth Audio Receiver HIFI Sound Blue tooth Receiver

Applicable models, applicable to all models, only need the original car to have AUX interface can be universal.

Blue tooth version: 5.0

product voltage: 5-12V

product functions:

using Jie Blue tooth master chip, Blue tooth 5.0 version, high-speed transmission without distortion the sound can reach high definition standard. The car Blue tooth music player has the function of wireless music transmission, which is aimed at the old and cash car audio, because many consumers find that listening to music is very troublesome. If there is no car with an audio input port reserved, it is necessary to burn a disc, and the audio source of the disc is updated slowly, which is inconvenient. For example, some cars are equipped with an external audio input port and need to pull a long signal line to listen to music, which is inconvenient in the center console. If you use Blue tooth transmission, you can say goodbye to the mess and also play music online. In the streaming media era, online APP is quite convenient and the sound source is updated in a timely manner. This product is for different brands of models, according to the original car host after the reserved interface, equipped with different connector to plug, the product uses a wide range of voltage input, adapt to different use environment,

Product real shot pictures:

Product instructions:

1. Production Introduction

1.1 Main :

1. Plug & Play: installed via original C D changer port, easy and fast, perfectly integrated with the car.

2. Wireless A2DP Playback: easily streaming music of Blue tooth devices into factory car stereo system.

3. Hi-fi Sound Performance: Connected to car stereo via wire harness, no interference and no loss of sound performance, rivaling original C D sound.

4. Allow you to easily have popular configuration of advanced car stereo, is the best choice for safe driving and enjoying digital music.

1.2 Note

1. Doesn't support hands-free phone call(HFP): It doesn't supports answer/hang up etc. Via car radio buttons and steering wheel buttons

2. Doesn't support Blue tooth AVRCP Control: Prev/Next Track, Pause/Play, Fast forward/backward via car radio buttons or steering wheel buttons.

1. Installation Guide

Before installation, Please read this manual carefully.

2.1 Installation Preparation

1. This product operates on a vehicle with 12 volt or 5 volt DC negative ground system. Do not use it on other voltage system.

2. This product only fits OEM or aftermarket car stereo with C D changer port and different solutions of Blue tooth adapter would be adopted according to different brands of vehicles or different car radios.

3. Make sure car stereo is powered off before installation. Otherwise the car stereo may be damaged. It is suggested to install it a car dealer shop or professional car stereo store.

4. Usually, the car stereo needs to be removed so as to plug Blue tooth kit main connector into C D changer port on radio pack. For some car models, Blue tooth kit can be installed in glove box or trunk where external C D changer port is located.

5. Please read the car stereo wiring diagram carefully before installation (normally on the top side of car stereo). Check and confirm where are the following ports on back of the stereo: C D changer port, B +/Ub+/12V ACC port(different car stereos has different name. such as: BAT, Bup+,B-U,MEM +12, KL.30) and GND port.

2.2 Installation Steps

1. Turn off car engine and remove key from ignition, if car radio uses a security code, make sure that you have the code before unplugging the radio.

2. Unmount the radio from the dash in order to get access to the back side of the radio, and find C D Changer port at the back of the radio. For details of unmount, please refer to car user manual or car stereo manual, or ask professional staff to unmount the radio.

3. Connect wire harness to car stereo radio module unit in advance. Be sure to make a firm connection. Then attach the wire harness connector to the back of stereo to the C D changer port.

4. For some car models, connect the red wire to B +/Ub+/12V ACC port (different car stereos has different name. such as: BAT, Bup+,B-U,MEM +12, KL.30) or other correct ACC power or 5 / 12V battery power. Connect the black wire to GND port of head unit power module unit.

5. Turn on the car and power on car Head Unit, press C D (or Disc / Mode / C DC / SOURCE / AUX) button for once or twice to switch to music play mode.

6. Turn on the Blue tooth function of mobile phone, search and pair with Blue tooth device named BT5909, Mobile phone will be able to connect to BTA after paired successfully. Test with mobile phone to confirm whether Blue tooth music work normally.

7. After successful test, re-assemble the radio, and put wire harness and module unit box in proper place (glove box, storage box, etc.), fasten screws between module unit and wire harness. Put back car head unit into original position. Now the installation is finished.

2.3 Important Installation Notes

1. As to some vehicles with external C D Changer, which occupies original C D

changer port, Parallel Harness is needed to keep the use of original C D changer (For some models only). Installation refers to former diagram.

2. As for Au-di factory radio of mini ISO 8 pin, its C DC connector is 20-pin block

connector, in order to install our Blue tooth kit, it requires to cut the 8-pin part or connect with special Au-di 20-pin adapter cable.

3. As for Clarion protocol radios, such as some Su baru radio and Su-zuki radio, it requires to totally unplug the wire harness from car power before installation.

Moreover, it is easy to plug connector in the opposite direction on Clarion radios, which causes short circuit. Make sure the connector is plugged in correct direction.

4. As for installation on CAN-Bus radios of Peu-geot/Citroen, Re-nault, F-ord (new) and Maz-da (new) and Op-el, it is required to unplug the radio from the power before installation. Otherwise, Blue tooth kit might not work properly or the radio might be damaged. Regarding Peu-geot/Citroen without pre-installed C D Changer, to enable Blue tooth kit to work, the C D Changer function must be activated by professional tools. Please enquire the Peu-geot/Citroen dealer on how to activate the C D Changer function.

5. As per B M W radios with C D Changer, the C D Changer must be completely

disconnected before installation (The 3-pin and the 6-pin connector, both are

located in the trunk, must be disconnected), otherwise Blue tooth kit will not be

recognized. Besides, if the B M W radios are with DSP, extra DSP kit and specific Blue tooth kit would be used.

This product only needs to have AUX interface or the criginal

Car C D player can be used with AUX interface.

(Please consult or confirm that you have an AUX interface

before purchasing)

1. Also many devices from 2007 in connection with the Blue tooth model KCE-400BT.

4 Spec

Voltage Input : 4.5V ~14.6V DC Operational Current : 600mA Standby Current : 20mA Operating Temperature: -35℃~+75℃

DAC Resolution : 20bit Total Harmonic Distortion : 0.05%

SN Ratio : 90dB Frequency Response : 20HZ-20KHZ

5 Warran-ty

All the items are guaranteed against manufacturing defects for a period of twelve months from purchase.