U-shaped 6-meter car air outlet bright strip chrome DIY decorative strip air outlet door and window clip 4*6mm interior and exterior decorative supplies

Product Description

bright silver soft strip with glue on the back, mainly used for car door seam decoration, middle net decoration, air outlet decoration line, car dashboard decoration, trunk lid decoration strip, engine cover decoration strip

this product is bright silver, and another: plated carbon pattern gold black (to be ordered).

Material: excellent chrome plating PVC soft material production

specifications: width is about 4*6mm, each roll is about 4 meters

special instructions: this product U-shaped inner with glue, U-shaped strip is stuck on the body

give your car DIY a new outfit

all models are common, please determine the shape of the car's tuyere and the required length before buying.
Scope of use: on the air outlet blades of the car air conditioner, on the side of the car door, on the side of the rain shield or other devices.

[Features] Buckle on the air outlet bar of the air conditioner in the car , now you can also DIY your own personality. No additional paste, directly buckle on the air outlet bar can be (size can be cut)! You can post as many bars as you want. See the picture below in detail.

[installation tips]]:
no need to paste, directly buckle on the tear air outlet bar (size can be cut by itself)! Material PVC soft material chrome plating (new material) production, internal glue (does not damage the car paint does not adhere) please note: close to the cost price!

Installation Method

after the paste surface is clean, it can be directly pasted. Do not wash the car within three days. When the curvature is relatively small, it can also be slightly bent. It's got glue in it!

(1) measure the size of the position, cut;

(2) than good position, clip into the cutter or door;

(3) All the long ones have been installed. It is time to install the short ones. First, adjust the wind direction to the left, measure the size, and put a short bright bar on the card. (4) hardcover use: if the scissors at both ends of the decorative strip are not neat after cutting, the truncated head can be flattened with a art cutter before pasting.

Precautions:(1) Do not construct on unclean or greasy car body.(2) Use stain removal oil to remove wax and greasy dirt on the installation part.(3) Do not touch water 24 hours after installation.(4) Do not tear off the re-paste after construction.