R410A R22 spool remover installation tool with dual size SAE 1/4 and 5/16 ports for HVAC

R410A R22 spool remover installation tool with dual size SAE 1/4 and 5/16 ports for R404A R407C R134A R12 R32 HVAC system
[Professional Assistant] Used to remove and install the spool in the live system. Quick and easy replacement of leaking spool. Dual size for R410a or R22 charging systems or other retrofit replacement systems.
[Excellent workmanship] The installation tool of the valve core remover is made of solid brass, the metal knob is designed with non-slip knurling
[Time-saving] The coring tool is convenient to insert the inner valve and control the core without stopping or releasing the refrigerant. It is convenient to disassemble and install the valve core, saving hours of emptying and filling time.
Spool removal wrench basic operating:
1. Pull out the dead point on the valve stem, close the valve on the tool, adjust the connection between the tool and the air conditioner interface, and tighten the valve on the air conditioner.
2. Make sure that the tool is tightly connected to the air conditioning valve, and then open the valve on the tool. Push the stem into the air conditioning valve and gently turn the tail knob of the extractor. Find the angle at which the cartridge is attached and release.
3. After removing the valve core, pull out the valve stem, close the valve on the remover, loosen the screw at the end of the tool, and take out the valve core. The job is done!
Note: It is recommended to close the spool wrench valve and disconnect the internal connection of the air conditioner before removing the spool.
Specification:
item: Valve core remover installation tool, R410a valve core removal tool, R22 valve core removal tool, a/c valve core removal tool, HVAC valve, valve core removal tool, Schrader valve core removal tool, pressurized small split system refrigeration Air conditioning service.
Service port: 1/4 inch and 5/16 inch SAE internal thread
bypass port: 1/4 inch SAE external thread
color: Yellow
material: Copper
package contents:
1 piece * spool remover installer

1 piece * spool remover
10Pcs * 5V1 spool

suit weight: 200G

Packing size: 115*180mm

Carton size 440*300*385MM, 100 PCS/box


Note: Light shooting and different display may cause the color of the item in the picture to be slightly different from the real thing. The allowable measurement error is/-1-3cm.