D-373 car stickers body stickers universal

Name: D-373 factory direct sales plaid waistline car body stickers personalized decorative decals models universal

Color: white, black, blue, red, yellow

Transfer: with transfer film

Customized: more than 5 sets of support customized

Applicable models: models universal

Size: 350 * 32CM (both sides of the body)

Weight: 274g

Material: Domestic BK material. If you need automobile special imported KK non-reflective material. There are also reflective material stickers. The price is higher. If you need to consult in Want.

Regarding color and style: Please contact customer service or leave a message for the desired style and color when purchasing. If there is no message, it will be randomly matched and shipped.

Installation Method:

① Installation method of small car stickers with transparent transfer film (dry pasting method):

1. Clean the body and keep it dry.
2. determine the location of the need to paste. Under normal circumstances, slowly stick one side, while scraping with a tool, while revealing the back paper.
3. if the figure is really not big, you can also tear off the transparent transfer film and stickers. But care must be taken to avoid accidental adhesion.
4. After pasting, scrape and press several times. The transparent transfer membrane was removed.
5. Make a cut with a utility cutter on the door and seam of the car and wrap it inwards.
6. Do not let the car sticker and the body have any separation or protrusion.

② Installation method of large car stickers with transparent transfer film (wet pasting method):
Tools: cloth, sprinkler, scraper or credit card

1. clean the body, evenly sprinkle water on the body part to be pasted - in order to reduce the viscosity of the sticker and facilitate the adjustment of the position.
2. determine the location of the need to paste. Slowly stick one side, gently scrape with a tool, and uncover the backing paper.
3. meet the door handle or wipe strip to cut the material and wrap it according to the situation.
4. appropriate adjustment, after the general position of the figure is determined, force repeatedly to scrape off the water and bubbles. The transparent transfer membrane was removed.
5. Make a cut with a utility cutter on the door and seam of the car and wrap it inwards.
6. do not let the car sticker and the body have any separation or protrusion.
7. as far as possible to let the moisture in the car stickers dry, there are conditions can be moderate heating and drying. Wait a day or two to wash the car, depending on the weather.

To reduce the difficulty of installation for customers, the car stickers we provide have been pre coated with transfer film. (Except for whole continuous graphics)

How to clear:

Gently scrape the edges of the sticker with your nails, then tear it off completely without leaving any marks or damaging the car paint. If it's cold in winter and you can't scrape the edges, you can use a hair dryer to heat the adhesive paper appropriately. After the adhesive melts and becomes soft, it can be easily removed.

Note:

1. in the decision to dress up the car before a week do not wax, wax will make the sticker sticky; car sticker paste good three days after the car please do not wash the car, do not paste in the rainy days, so the effect will not be good oh!

2. such as stickers need to be affixed to the doorway or other activities required, don't worry, affixed with a fast cutter to cut.

3. such as their own really do not want to do it, please go to the local paste the sun film place to ask for help.