D-745 car machine cover film car electroplating mirror film car color change film light plating body film

"Weight": 20*152, 92g 50*152,255g 30*152,135g,50*200,285g

"Product specs": a number of specs

[material]: high-end imported car color change film PVC with air guide groove

The privilege of a luxury car! Luxury enjoyment of luxury decor! Only it can highlight your noble identity! No other choice! Come and enjoy this feeling!

No fading, with air guide, not afraid of bubbles when pasting, the latest technology product when you meet bubbles, grind the bubbles with your hands. Automatic disappearance, can be repeated paste, do not leave glue does not hurt paint, new technology will breathe high level film!

The width of the 1.5 is suitable for most models on the market!!!

The whole film is pasted: no splicing, no seams, no traces, with air guide, no longer have to worry about bubbles, to ensure the integrity of the car surface;

Isolation of corrosion: can resist most of the oil, grease, fuel, fat solvent, weak acid, weak alkali, weak salt, completely isolated from acid rain, gravel bird droppings, grease and other sustained damage;
wear resistance scratch: super toughness resilience increased by more than 10 times, automatically bridging small scratches, excellent resistance to general scratches, rubbing and wear;
heat insulation and flame retardant: adapt to temperature difference -40 ℃ to +90 ℃, have good heat insulation and inert temperature conduction effect, flame retardant;

Strong fit: no wrinkles, no bubbles, no cracking, no warping;
no residual glue: easy to paste, easy to remove, no damage to the paint, no reamin, to achieve amazing effect beyond imagination.
Method of use
[dry paste method steps] use tools: clean cloth, scraper, credit card
1. Clean the pasting position of the car body. If conditions permit, you can use a cloth without fiber shedding with 50% alcohol or isopropanol or acetone to scrub, or you can use soapy water. The surface cleaned by the solvent shall be pasted after the solvent is completely volatilized.
2. Under normal circumstances, slowly paste, scrape with tools and uncover the bottom paper.
3. If the length and width of the stickers are less than 10cm, you can tear off all the stickers and paste them again. However, care must be taken not to accidentally stick or fall off the ground and stick dust.
4. Use a clean cloth or scraper [such as a telephone card or credit card] to repeatedly rub or scrape on the film; until there is no bubble in the car sticker, it is recommended not to expose to the sun or wash the car within 24 hours.
5. In case of car doors and seams, use a utility cut to separate them and stick them inward.
6. Suggestion: Try not to expose to the sun within 24 hours, and it is not suitable to wash the car within 48 hours.