Schamley highlight 5D carbon fiber color change film 6d car sticker 7D high-gloss interior car film car color change

Product color: black 5D 6D two, are 3 layers (with protective film)

 This product is custom-made, special size does not support 7 days no reason to return.

Common colors: black, red, blue, green, yellow, orange, white, silver, gray.

Interior rearview mirror computer mobile phone bicycle motorcycle car can be pasted, furniture can also be pasted

If you don't like it, you can uncover it at any time, leaving no residual glue and not affecting the car as it is.

Carbon fiber sticker, with waterproof, sunscreen, smooth surface, telescopic extensibility and durability, etc., has the characteristics of convenient replacement. It is the choice of car lovers to decorate their cars.

The third layer is the film that has a protective film on the surface of the film to prevent scratches during construction and affect the effect. Because the protective film is relatively thin, there will be some wrinkles during production, but it does not affect the use. 

The whole film is pasted: no splicing, no seams, no traces, with air guide, no more worries about bubbles,
lightweight and tough: the film thickness is thinner, the flexibility and ductility are stronger (any stretch after heating, and the shape does not shrink after returning to normal temperature), which can show ideal tortuality on the smaller arc surface and lasting adhesion force;
strong: environmental resistance, no yellowing, long service life;
isolation of corrosion: can resist most of the oil, grease, fuel, fat solvent, weak acid, weak alkali, weak salt, isolated from acid rain, gravel bird droppings, grease and other sustained damage;
wear resistance scratch: toughness recovery force increased by more than 10 times, automatically bridge small scratches, resist general scratches, rub and wear;
excellent filtering: refraction, filtering harmful light, blocking light, UV damage to the car paint, protect the gloss and durability of the original paint;
heat insulation and flame retardant: adapt to temperature difference -40 ℃ to +90 ℃, good heat insulation and inert heat conduction effect, flame retardant;
· fit: no folds, no bubbles, no cracking, no warping;
convenient maintenance: reduce car washing and waxing hours and costs;
no residual glue: easy to paste, easy to remove, no damage to the paint surface, no residual
environmental protection: no paint, human body and natural produce any pollution.

method of use]]

dry paste method]

Suitable for cars, motorcycles or small cars

Use tools: clean cloth, blade or credit card

1. Clean the pasting position of the car body. If conditions permit, use a cloth without fiber shedding with 50% alcohol or isopropanol or acetone to scrub, or use soapy water. The surface cleaned by the solvent needs to be pasted after the solvent volatilizes.

2. Under normal circumstances, slowly paste, scrape with tools and uncover the bottom paper.

3. If the length and width of the stickers are less than 10cm, you can tear off all the stickers and paste them again. However, care must be taken not to accidentally stick or fall off the ground and stick dust.

4. Use a clean cloth or scraper [such as a telephone card or credit card] to repeatedly rub or scrape on the film until there is no bubble in the car sticker.

.

wet paste method]

Applicable for cars or large vehicles (double use recommended)

Use tools: watering can, clean cloth, scraper, utility cutter

1. Clean the surface to be pasted. Before preparing the sticker, please spray glass water evenly on the surface to be pasted (after cleaning the car, spray water with a watering can on the body part to be pasted)-mainly to reduce the viscosity of the sticker and facilitate the adjustment of the position.

2. After determining the position to be pasted, lift it together with the car sticker from right to left [or from top to bottom] and press it on the car gauge with a rag, then paste it, flatten it with a rag, and uncover the bottom paper.

3. In case of door handles or anti-collision strips, cut the materials and wrap them in or load them off according to the situation.

4. Adjust in time. After the general position of the figure is determined correctly, use the scraper to repeatedly scrape off water and bubbles. When using the scraper, scrape obliquely from right to left.

5. In case of car doors and seams, use a utility cutter to separate them and stick them inward.

6. Try to dry the water in the car sticker. If conditions permit, you can use the air cylinder to heat and dry it properly.

Recommendation: Try not to expose yourself to the sun within 24 hours and not to wash the car within 48 hours.