Car dual-cylinder air pump high-power car air pump tire 12V electric high-pressure air pump

ST-206 car DC12V dual cylinder inflation pump, metal car tire inflation pump, high-power inflation pump
Product Name: DC12V Double Cylinder Inflator Pump
Product brand: Suitu/SUTU
Product model: ST-206
Product voltage: DC12V
Product pressure: 150PSI
Product configuration:
PJST-205B air pump storage bag weighs approximately 95g
ST-206A Car Inflator Pump - Mechanical without Light
ST-206A Car Inflator Pump - Mechanical with Light
ST-206A Car Inflator Pump - Mechanical with Light+Tools+Box
ST-206B Car Inflator Pump - Digital Display with Light
ST-206B-2 Car Inflator Pump - Digital Display with Light+Tools+Box
Accessories: Approximately 3-meter power cord+battery clip+inflation extension tube approximately 45cm+inflation nozzle set
Product cylinder body: dual cylinder
Flow rate: 45-55L/min
Product power: 180-220W
Product current: 8-13A
Product packaging: Leather box+optional handbag
Outer box size: 295x155x220mm
Net weight of the product: approximately 2.2kg
Packaging weight: approximately 3.1KG
Product Description:
1. This machine is suitable for 12V car tires, especially for larger tires such as 4x4, medium buses, trucks weighing less than 2 tons, sedans, etc. It has a large air volume and fast inflation.
2. It is also suitable for motorcycles, bicycles, balls, rubber boats, beach floats, inflatable toys, and more.
3. When working on highways, outdoors, or in the morning, sudden tire leakage or tire injection can be more effective for emergency use.
4. Keeping the correct tire pressure on car tires can ensure driving safety and save gasoline. It can be used with the car as a precautionary measure and has endless uses.
5. Equipped with a complete set of inflation nozzles, it can be used to inflate tires, rubber boats, air cushions, inflatable toys, balls, and other various purposes.
usage method:
1. Insert the air nozzle at the top of the rubber tube directly into the tire valve. When you hear the sound of air leaking out of the tire, it means that the air has circulated. Continue to tighten the air nozzle, and at this point, the air will no longer leak out.
2. Remove the power cord battery clip (without cigarette-lighter plug) and clip it directly onto the positive and negative terminals of the battery. Avoid short circuiting the wire and turn on the switch to inflate it. (The dual cylinder inflation pump has high power and cannot be directly plugged into the cigarette-lighter through a converter to obtain electricity, as it may easily burn out the cigarette-lighter and wiring on the vehicle.)
3. When inflating, the gauge rises with the saturation level of the tire. When it reaches the appropriate tire pressure (generally 223kPa=35PSI for car tires), remove the plug and air nozzle to complete the work.
4. Please connect the professional ball needle and plastic nozzle equipped with this machine to the air nozzle to inflate the balls and other gas requiring equipment.

Matters needing attention:
1. Not suitable for inflating tires on large and overweight vehicles, such as trucks, and container trucks;
2. Please start the car engine to enhance power when using, without consuming the car battery power;
3. This machine is limited to using DC (DC12V30A) power supply and cannot use household high-voltage AC (AC220V) power supply;
4. When inflating, please stop for 10 minutes after continuous working to cool down, in order to prevent damage to the air pump and accessories, and to extend the life of the motor. When inflating the rubber boat, it can work continuously for 30 minutes;
5. Generally, when inflating a tire, it takes about 3-5 minutes to reach a normal tire pressure of 30 PSI, while larger tires take a slightly longer time; If the instrument quickly rises to 50-100 PSI when starting to inflate, it indicates that the air is blocked and has not entered the tire. At this time, the air nozzle connector needs to be immediately unplugged and operated again, otherwise the motor and instrument are prone to damage.
6. Do not leave the body during use, pay attention to tire pressure at all times, and avoid over saturation;
7. After using this machine, the air nozzle wrench must be straightened to avoid rubber elasticity fatigue inside;
8. The plug of this air pump is equipped with a fuse. If the air pump does not start, please open the plug to check and replace it (the fuse is 15A);
9. This machine should be kept away from water, heavy drops, and sand and mud intrusion, and should not be played with by kids to prevent damage;
10. Each type of tire requires different pressures, please refer to the markings on the side of the car tire