Car steering wheel booster ball high-end metal booster ball adjustable auxiliary steering set bead modification supplies

The steering wheel connector below the product is made of alloy material, and the turntable above is ABS electroplated. The inside of the circle connector is attached with a rubber ring.

Commodity features:

1. Generally, you have to turn hard when driving through corners. If you have a steering wheel assist, it is convenient to turn.

2. Install on the steering wheel.

3. The turntable can rotate 90 degrees.

4. Suitable for steering wheels with a thickness of 32mm or less.

5. rubber ring is attached to the inside of the connector.

Installation method:

1. Use a screwdriver to loosen the booster ball fastening screw until the lower fastening position can be opened

2. Pad the inner lining in an appropriate position, clamp the booster ball on the steering wheel, and screw on the fastening screw (do not tighten it first, rotate the booster ball appropriately, and tighten the screw if you feel that it is not biased)

the working principle of booster ball:

Although many steering wheels have power-assisted devices, it still feels very dignified when turning. Usually both hands are used to play a circle, and sometimes one hand may have to play the wheel. But after loading the booster ball, one hand can play a circle. This is because the booster ball concentrates the force scattered on the entire steering wheel more in one position through physical principles, and it is easier to operate.