D-623 car sticker hood sticker pull flower hood sticker front sticker modified scratch covering vinyl car sticker

commodity name: striped car stickers series

Commodity material: PVC material 

Size: 130*24CM

minimum order quantity: 5 sheets

Weight: 86g

installation method:

1 Installation method of small car sticker with transparent transfer film (dry sticker method):

1. Clean the body and keep it dry.
2. Determine the location to be pasted. Under normal circumstances, slowly paste, scrape with tools, and uncover the bottom paper.
3. If the graphic is really small, you can also tear off all the transparent transfer film and stickers and paste them again. However, care must be taken not to accidentally adhere.
4. After pasting, scrape and press several times. Remove the transparent transfer film.
5. Use a art cutter to draw a cut on the door and sewing, and wrap it inward.
6. Do not let the car sticker and the body have any separation or protrusion.

2 Installation method of large car stickers with transparent transfer film (wet paste method):
Tools: rag, sprinkler, scraper or credit card

1. Clean the body and sprinkle water evenly on the body part to be pasted-to reduce the viscosity of the sticker and facilitate the adjustment of the position.
2. Determine the location to be pasted. Slowly paste and gently scrape with a tool while uncovering the bottom paper.
3. In case of door handle or anti-scratch strip, cut the material and wrap it in according to the situation.
4, appropriate adjustment, the general position of the graphics to determine the correct, force repeatedly scraping water and bubbles. Remove the transparent transfer film.
5. Use a utility cutter to draw a cut on the door and sewing, and wrap it inward.
6. Do not let the car sticker and the body have any separation or protrusion.
7, try to let the moisture in the car stickers dry, conditions can be moderately heated drying. Depending on the weather, wash the car in a day or two.

In order to reduce the difficulty of installation for customers, the car stickers we provide have been coated with transfer film in advance. (except for whole continuous graphics)

how to clear:

gently scrape the edges of the sticker with your fingernails and tear it off entirely without leaving marks or damaging the paint. In winter, if it is too cold to blow the corners, the adhesive paper can be properly heated by an electric hair dryer, and the adhesive can be easily removed after it is soft.

Note:

1. Don't wax one week before deciding to dress up your car. Wax will make the sticker not stick firmly. Please do not wash the car within three days after the sticker is pasted, and do not paste it on rainy days, the effect will not be good!

2. If the sticker needs to be pasted on the door crack or other places that need activities, don't worry, just cut it with a quick cutter after pasting.

3. If you really don't want to do it yourself, please go to the place where the solar film is pasted and ask for help.