DC-DC Boost Module High Voltage ZVS Capacitor Charging Electromagnetic Accelerator 45-390V 780V Adjustable Voltage Stabilization
$1.61
- 1688 Link: View 1688 Product
- Product Code: EPCS8672
- Availability: In Stock
- 3 or more $1.61
New power high voltage boost module, plus or minus 45-390V 780V ultra-wide voltage range, input double current limiting protection, output voltage regulator function, suitable for capacitor charging, hunting, deratization, glow tube power supply
module parameters:
module Name: high voltage boost module
module properties: non-isolated boost module
input voltage: two input voltage ranges are selectable (selected by jumpers on the back of the PCB, shipment defaults to 10-32V input)
1,8-16V input (for triple Li and 12V battery applications)
2,10-32V input (for wide input voltage range applications)
input current:(MAX)
static working current:15mA (when 12V rises to 50V, the higher the output voltage, the higher the static current will increase)
output voltage:45-390V continuously adjustable.
Output current: 0.2A MAX (related to the input and output voltage difference, the higher the output voltage, the smaller the output current)
output power:40W (peak 70W)
operating temperature:- 40~85 degrees (please strengthen heat dissipation when the ambient temperature is too high)
operating frequency:75KHz
conversion efficiency:88% (efficiency is related to input and output voltage, current, and differential pressure)
short circuit protection: there is. (Input 10A fuse, please do not directly short-circuit the output terminal to pull the arc! Direct short circuit pull arc it may damage the rectifier, such as short circuit pull arc please series power resistor current limit)
overcurrent protection: there is. (The input current exceeds 4., reduce the output voltage)
overvoltage protection: there is. (The output voltage exceeds 410V, reduce the output voltage)
Input Polarity Protection: Yes (Non-resettable; incorrect connections will blow the fuse. Avoid incorrect connections if possible.)
installation method:4 3mm screws
wiring mode: terminal free welding output (with housing for welding output)
module Dimensions: length 60mm Width 50mm Height 22mm
to the capacitor charging time measured data:
470uF full to 390V for 2 seconds
1000uF full to 390V for 4 seconds
2200uF full to 390V for 8 seconds
4700uF full to 390V time 18 seconds
special attention!!! The output of this module is high pressure, which will be life-threatening to people and animals. Please pay attention to precautions during use. The shop is not responsible for this.
Scope of application:
1. Capacitor charging, Electromagnetic Launcher Power Supply.
2. To supply power to your electronic equipment, you can set the output value according to your system voltage.
3. Withstand voltage test power supply, glow tube power supply.
4, hunting, rodent control.
Product Info | |
Brand | Ling Hong module |
Featured service | DC-DC Boost Module |
Licensable private label | Yes |
Main downstream platform | LAZADA |
Main sales area | Middle East |
Main Sales Region | North America |
Model | 780V adjustable voltage regulator |
Power | W |
Processor Speed | S |
Purpose | DC-DC boost module |
Supply Current | A |
Supply voltage | V |
Type | DC-DC Boost Module |
Use | DC-DC boost module |
Whether cross-border export exclusive source | Yes |
Whether the source of cross-border export is exclusive | Yes |
Tags: DCDC, Boost, Module, High, Voltage, ZVS, Capacitor, Charging, Electromagnetic, Accelerator, Adjustable, Stabilization