Power grinding accessories diamond grinding head jade agate peeling window emery grinding needle 50 boxes

50 large head box: about 0.275kg
50 small head box: about 0.205kg

Material; Emery grinding head

Number; 50

Plastic box packaging.

Connecting rod specifications; 3MM

Suitable for use in electronic mills and table mills

Use:     jade jade peeled and polished carving

Metal Abrasives Dressing, Grinding, Deburring and Engraving

Glass engraving grinding

Imported diamond powder refined molding, the use of hardness, wear resistance, and excellent impact resistance, products related to stone, ceramics, glass, carbide, gemstone processing and other fields, with a small slit, can be used to polish, cutting the surface of the object, a wide range of applications.

5 pieces of inverted nozzle: 3.17 × 2.5, 3.2, 4.0, 5.0, 6mm

4 pieces of cylindrical round head: 3.17 × 3.0, 4.0, 5.0, 6.0mm

Spherical 4 pieces: 3.17 × 3.0, 4.0, 5.0, 6.0mm

Torch type 5 pieces: 3.17 × 2.5, 3.5, 4, 5, 6mm

Cylindrical flat head 3 pieces: 3.17 × 4, 5, 6mm

Umbrella type 3 pieces: 3.17 × 4, 8, 10mm

Round ladder type 2 pieces: 3.17 × 8, 10mm

7 pieces of D-shaped round : 3.17 shank × 12 diameter × 2 thickness, 3.17 shank × 12 diameter × 3 thickness, 3.17 shank × 12 diameter × 2.5 thickness, 3.17 shank × 16 diameter × 3 thickness × 2 pieces, 3.17 shank × 16 diameter × 4.5 thickness × 2 pieces.

7 pieces of D-shaped flat : 3.17 shank × 12 diameter × 1.5 thickness, 3.17 shank × 12 diameter × 2 thickness, 3.17 shank × 12 diameter × 3 thickness, 3.17 shank × 16 diameter × 3 thickness × 2 pieces, 3.17 shank × 16 diameter × 4.5 thickness × 2 pieces.

7 needles: 3.17 × 2.5, 3.5, 4, 5, 6mm

Round inverted cone concave surface type 1 piece: 3.17 × 10

Round inverted cone plane 1 piece: 3.17 × 10

Round Ding concave  type 1 piece: 3.17 × 12 × 3.5

Reminder: When using diamond tools, please pay attention to the following:

1. When installing a new tool, be sure to try whether the tool is jumping. If it is jumping, it cannot be operated directly. It can only be used if it is adjusted to not jump. Otherwise, the tools will wear out quickly and the carved things will not be very smooth. Adjustment method: Use a small wrench to change the chuck to gently tap the high-speed rotating tool handle until the tool is stable. It is strictly forbidden to knock the electronic machine. The adjustment method is to loosen the chuck and turn the tool at an angle or extend and retract a little.

2. Be sure to drain water for cooling (similar to the dripping device in the hospital). For example, if a dry drill is used, the diamond on the tool head will be graphitized due to overheating, thus quickly wearing and scrapping.

3. When drilling, try to avoid shaking, because shaking will cause local damage to the tool and accelerate the damage of the entire tool.

4. Speed as high as possible. Generally, the line speed is not less than 10-20 meters per second.

5. Light pressure feed, diamond tools rely on grinding to process the workpiece, too much force, grinding is not easy to eliminate, the tool is also easy to damage.