Flange coupling rigid flange flange 3/4/5/6/8/10/11/12mm coupling guide shaft support

A flange coupling is a special coupling that can fix a shaft to a flat surface and can easily install other accessories on the shaft. Quantity is better than price

Material: Iron exquisite plating

Product parameters: Inner diameter 2mm, 3mm, 3.17mm, 4mm, 5mm, 6mm, 6.35mm dimensions are: cylindrical outer diameter 10mm, cylindrical height 10mm, the overall height 12mm, the base opposite side hole spacing 16MM fixing hole screws are M3.

 

The three dimensions of the inner diameter of 7mm, 8mm and 10mm are: the outer diameter of the cylinder is 16mm, the height of the cylinder is 10mm, the overall height is 13mm, the distance between the side holes of the base is 24MM, and the fixing hole screws are M4.

 

 

 

Inside diameter 11mm, 12mm, 14mm three sizes: cylindrical outer diameter 18mm cylindrical height 10mm, the overall height of 13mm, the base of the opposite side of the hole spacing 26MM, fixed hole screws are M4.

 

 Each flange coupling comes with 2 fixed top wires 1 wrench per order