Plastic thickened exhaust hood exhaust cap spherical exhaust vent outer wall ventilation hood 150mm
$1.24
- 1688 Link: View 1688 Product
- Product Code: EPCS15019
- Availability: In Stock
- 500 or more $0.95
- 2000 or more $0.84
Plastic thickened exhaust hood, exhaust cap, spherical exhaust port, ventilation opening, exterior wall ventilation hood, 150mm
Material: Thickened plastic
Diameter: 146mm, suitable for 160 wall holes and 160PVC pipes
Weight 234g
 |  |
| 100 thick plastic ventilation cap | Rainproof hood for exterior walls |
Introduction to Wind Cap
A wind cap is applied to the position of the air outlet on the exterior wall. It is usually made of stainless steel and equipped with a stainless steel wire mesh inside. The purpose of these wires is to prevent mosquitoes and mice from entering. Its shape is a protruding semicircle, with half of it open. Half open is used to avoid rainwater from entering, and the hood is mainly used in ventilation fans, range hoods, bathroom heaters, and so on. The material of the hood includes stainless steel, plastic, and other materials.
Installation of hood
1. Firstly, make a hole in a suitable location on the wall that needs to be installed. The drilling process requires the use of technicians to operate the hole, as it requires a certain level of technical and psychological expertise. The drilled holes should be symmetrical.
2. At this point, prepare some wooden accessories and a foam pipe, and then place the air cap on top of the circular hole.
3. Fix the wind cap with screws, and the specific method of fixing is to fix the feet of the wind cap on the wall with screws.
4. After fixation, it is necessary to seal the Zizhou of the wind cap base with mud and water slurry to prevent water from seeping in in the future.
Precautions for installation of wind hood
The wind cap is installed at the end of the exhaust system during installation, and it utilizes wind pressure or thermal pressure. It is one of the important devices for natural exhaust. The installation position of the hood is not only at the end of the exhaust system, but also on the outdoor roof.
The processing and production of wind caps must be carried out in accordance with the dimensions stipulated by the state. The size requirements must be accurate and the shape must be regular. The wind cap installed on the roof must pay attention to the waterproof work of the roof. The bottom of the wind cap should be tightly combined with the roof, otherwise it will cause a lot of unnecessary trouble if the wind cap gets wet.
The installation of the hood of the ventilation system and the drip tray and drip trough of the air conditioning system must be ensured to be firm, without leakage, and the condensate should be directed to the designated location.
Windcaps play an irreplaceable role in our lives, and we can observe them carefully in our daily lives.
| Product Info | |
| Model | A2-0245 |
| Origin | Zhejiang |
Tags: Plastic, thickened, exhaust, hood, cap, spherical, vent, outer, wall, ventilation, mm