Rear Toilet Connection Pipe Shifter Toilet Drain Pipe Connector Toilet Wall Drain Hose Fitting

a large quantity of Cong, welcome inquiry!!

Other products:

washbasin sewer pipe installation method:

1. Purchase the drain and drain pipe matched with the basin at home, and pay attention to the difference between those with overflow and those without overflow. Choose the right purchase for your home.

2. Remove the original damaged drain and clean the drain of the basin with a cutter to ensure that it is clean and free of debris. This will ensure that there is no water leakage after installation.

3. Split the drain, install the middle part first, remove the lower part of the sealing ring, align the water pipe with the overflow port, gently put it in and rotate it to make the sealing ring and the overflow port fit closely.

4. Install the lower sealing ring at the contact position between the sewer pipe and the basin, and turn the screw counterclockwise to make the lower sealing ring and the basin fit closely. Generally, the sealing effect can be ensured by manual installation of the sealing ring with good-quality. If the sealing ring cannot be tightened manually, a wrench can be used.

5. Align the upper opening of the sewer with the lower opening of the sewer and connect the sewer. If the use of deodorant type, pay attention to the connection between the sewer pipe and the floor drain.

6. Put in the last part of the spring drain. After all the installation is completed, press the drain to seal, unscrew the water pipe to gather water, and then press the drain again to seal and drain water. The use is normal. All pipes are sealed and watertight. Congratulations, the replacement and maintenance of the sewer and sewer pipes have been completed.