USB2.0 expansion module HUB hub 1 minute 4 1 drag 4 interface transfer development board drive-free

USB 2.0 high-speed extender module HUB module splitter split four hub modules.
Size:29.5mm * 18.9mm * 4.8mm (length * width * height)

The reserved power input port is located at the upper left corner of the board, marking the 5Vin position.

Tips: When connecting high-current peripherals, the 5V power supply current from the USB input port is not enough, you can enable the external reserved power input port.

High speed stable heating small power consumption is our design concept

we have re-burned Linux kernel, Ubuntu, Android, windows XP ,win2000,win 7, win8,win10 and other system platform drivers in the chip.

Each system is all drive-free, plug and play, and can expand the expansion module of 4-way multi-interface equipment.

Computer motherboard (2.54mm interface is reserved for this module input)

computer All-in-One USB Port Expansion

notebook, tablet computer USB port expansion

ARM, MIPS expansion of USB Interface of Chip Development Board

expansion of USB Interface for Advertising Machine and Internet TV

expansion of the USB port of the Internet camera, etc.

The USB extender module has no connection seat, and each pin pad is reserved, the input hole is reserved for the standard 2.54mm and 2.0mm single row of pins on the main brain motherboard. The four USB ports are all 2.0mm single row of pins and three 2mm diameter positioning holes.

PCBA bare board is convenient for each user to DIY each interface peripherals.

The input adopts the standard USB male interface matched with the computer, which can be directly inserted into the USB seat of the computer for use, expanding the four reserved welding holes for DIY. application examples, typically such as a USB mouse, after a long time of USB peripherals such as USB keyboards, the connecting lines are easy to break, causing the peripherals to be unable to be used normally. In fact, the peripherals are not damaged. The peripherals can be directly welded to the following modules with wires to connect the computers. The peripherals with faulty wires can be used again.